How to Tie a Pat's Rubber Legs Fly

Learn how to tie the Pat's Rubber Legs fly pattern including step-by-step instructions, a video tutorial, pictures, and much more. Improve your fly tying skills here.

Trident Fly Fishing is a full-service fly shop. We spend a lot of time testing gear and writing reviews to give you all of the tools to make your next trip a success. We are not a blog or a review site. 100% of our funding comes from your gear purchases, so if this blog post helps you on your next fly fishing adventure, please support us by buying your gear from us.

If you've spent any time fishing the western US, chances are you've heard/fished a rubber legs. These unassuming, simple stonefly patterns feature a body and legs - that's it - which means they're incredibly easy to tie. Even though they're really simple, trout in the western US feed on large stoneflies under the surface all the time so they're always looking for one of these. This is also a great guide pattern, searching pattern, and dropper. Tune in as Jared provides step-by-step instructions to tie this widely-used pattern and be sure to watch until the end when he gives some lesser-known advice about how to make this pattern even more realistic.

Materials:

We've put together a kit that contains all the materials you need to tie this exact fly pattern.

Click the button below to shop the selection.

• Tiemco TMC 200R Nymph Hook - Size 8
• Hareline Spooled Lead Wire
• UTC Ultra Thread 140 Denier - Brown
• Spirit River Flex-Floss - Brown
• Hareline Varigated Chenille - Black/Coffee

Step One:

Start the fly by wrapping the lead wire up the hook shank. Cover most of the hook shank with wire and finish wrapping just behind the eye of the hook. Break off the wire and tuck the tag end in.

Step Two:

Start your thread and anchor the wire to the hook shank. Take open wraps over the top of the wire down and back up the hook shank several times until the wire is anchored in place.

Step Three:

Next, tie in the tail of the fly. Start by tying one long strand of Flex-Floss in on the near side of the hook shank then wrapping it over top of the hook and tying it in on the other side. Trim the excess so the two sides are equal in length.

Step Four:

Strip some of the fibers off of the core of a piece of Varigated Chenille and tie it in just in front of the tail. Wrap rearward to anchor the Chenille in place then wrap your thread 3/4 of the way up the hook shank.

Step Five:

Tie in the legs of the fly. Choose three strands of Flex-Floss and tie them in right on top of the hook shank. After securing them to the hook shank, position the legs so there are three on either side of the shank and keep them in place with figure-8 wraps. Once the legs are attached, return your thread to just behind the eye of the hook.

Step Six:

Wrap the Chenille forward taking touching turns. When you get to the legs, pull one set of legs back and take a wrap in front of them. Then pull another set back and wrap forward. Do the same with the third set so the legs are separated by a wrap of Chenille each. Tie off the Chenille right behind the eye of the hook and cut off any excess material.

Step Seven:

Next, tie in the final set of Flex-Floss for the antenna of the fly. Use the same tactic you used to tie in the tail; choose one long strand of Flex-Floss and tie it in on one side of the hook shank. Double it over and tie the other side in on the other side of the hook shank. Throw a whip finish and cut off your thread.

Step Eight:

Trim the legs to length. The easiest way to trim the legs is by trimming the antenna first then pulling all of the legs on the body down and cutting them at the same time. Then trim the tail.

Step Nine:

Use your scissors to trim the body to create a small taper. Trim only the back end of the fly to make it thinner than the head. This isn't a necessary step but it's one that gives the fly a more realistic profile in the water.

Step Ten:

And that's the Pat's Rubber Legs! It's a really easy pattern to tie and you can tie several in one sitting. It's a really productive Stonefly nymph in the western US during the spring and summer months.

Questions?

Give us a call here at the shop at (888) 413-5211 or email us anytime at [email protected].